Dhoot Transmission Ltd.

Liquid Silicon Rubber (LSR)

Seal

A Seal is a critical component used to prevent the ingress of dust, moisture, air, and other contaminants into electrical and mechanical systems. It ensures a secure and tight closure between components, enhancing overall system reliability and performance.

Wire Seals

Applications

Protecting electrical connections from water and dust. Waterproof sealing for automotive wiring harnesses and other electrical connectors where low electrical contact contamination is required.

Available Wire Seal Variants

Wire Seal SILØ 6.1 L7.8 MM GRN CS 0.35-0.5
Wire Seal SILØ 6.1 L7.8 MM YLW CS 0.75-1.0
Wire Seal for EJ MKII (1.2-1.7 mm)
Single Wire Seal Dia 3.45 mm
Seal ID-1.2, OD 5.6 Blue (CSA 1.2-2.1)
Wire Seal OD 4.6 MM Cable OD 1.35-1.9
Single Wire Seal Dia 1.4-1.9 mm
Wire Seal ID-1.6, OD-1.9 (CSA 0.30-0.75)
Wire Seal MAP Sensor
Wire Seal OD 3.7 L8.12W OD 1.4~1.7
Wire Seal 090S-BLU (1.5-2.0 MM)

Key Features

Liquid Injection Moulding System (LIMS) Grade: Formulated for Fast, Consistent LIMS Processing.
Hardness: (40 To 60) Shore A (good balance of flexibility and seal compression).
Low Compression Set: Maintains Sealing Force Over Time.
Good mechanical properties (tensile, elongation, tear) for durable wire-seal use.
Self Lubricating

Technical Specification

Material: Liquid Silicone Rubber (LSR).
Temperature Resistance: Range (-40 To +200) °C.
Hardness: Shore A (40 To 60).
Tensile Strength: MPa (6.0 To 20.0).
Elongation (%): 400 To 800.

Liquid Silicon Rubber (LSR)

Seal

Wire Seals

Applications

Protecting electrical connections from water and dust. Waterproof sealing for automotive wiring harnesses and other electrical connectors where low electrical contact contamination is required.

Available Wire Seal Variants

Wire Seal SILØ 6.1 L7.8 MM GRN CS 0.35-0.5
Wire Seal SILØ 6.1 L7.8 MM YLW CS 0.75-1.0
Wire Seal for EJ MKII (1.2-1.7 mm)
Single Wire Seal Dia 3.45 mm
Seal ID-1.2, OD 5.6 Blue (CSA 1.2-2.1)
Wire Seal OD 4.6 MM Cable OD 1.35-1.9
Single Wire Seal Dia 1.4-1.9 mm
Wire Seal ID-1.6, OD-1.9 (CSA 0.30-0.75)
Wire Seal MAP Sensor
Wire Seal OD 3.7 L8.12W OD 1.4~1.7
Wire Seal 090S-BLU (1.5-2.0 MM)

Key Features

Liquid Injection Moulding System (LIMS) Grade: Formulated for Fast, Consistent LIMS Processing.
Hardness: (40 To 60) Shore A (good balance of flexibility and seal compression).
Low Compression Set: Maintains Sealing Force Over Time.
Good mechanical properties (tensile, elongation, tear) for durable wire-seal use.
Self Lubricating

Technical Specification

Material: Liquid Silicone Rubber (LSR).
Temperature Resistance: Range (-40 To +200) °C.
Hardness: Shore A (40 To 60).
Tensile Strength: MPa (6.0 To 20.0).
Elongation (%): 400 To 800.

Products

Group Companies

Investor Relations

Corporate Office

Liquid Silicon Rubber (LSR)

Seal

Key Metrics

NUM+ Harnesses

NUM% PPM

NUM+ Countries

NUM+ Active

Wire Seals

Wire Seals

Applications

Available Wire Seal Variants

Key Features

Technical Specification

Corporate Office

Send Us an Enquiry

Products

Group Companies

Investor Relations

Corporate Office

Liquid Silicon Rubber (LSR)

Seal

Key Metrics

NUM+ Harnesses

NUM% PPM

NUM+ Countries

NUM+ Active

Wire Seals

Wire Seals

Applications

Available Wire Seal Variants

Key Features

Technical Specification

Corporate Office

Send Us an Enquiry